Found 34 Motive Gear products fitting 1949 clear
| Differential Carrier Shim Kit | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: 1115 |
| App Model:
Dana 44 Standard |
|
| Taxonomy A:
LD Differential LD Differential LD Differential |
|
| Differential Case Design Type:
Dana 44 Reverse Dana 44 Standard |
|
| Differential Cover Gasket | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: 5114 |
| App Model:
Dana AdvanTEK M210 Dana AdvanTEK M220 Dana 44 Dana 44 HD Dana 44 ICA Dana 44 JK Dana 44 JK Reverse Dana 44 JL Dana 44 JL Reverse Dana 44 Nissan Dana 44 Reverse Dana 44 Standard |
|
| Cover Gasket Bolt Hole Quantity:
10 |
|
| Taxonomy A:
LD Differential LD Differential LD Differential |
|
| Drive Shaft Pinion Yoke | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: MG1350-D44 |
| App Model:
Dana 44 Reverse Dana 44 Standard |
|
| Splined Bore Diameter:
1.14 (Inch) |
|
| Universal Joint Series:
1350 |
|
| Drive Shaft Pinion Yoke | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: MG1310-6010 |
| App Model:
Dana 60 Reverse Dana 60 Standard Dana 61 Dana 70 Dana 70 U |
|
| Pressure Angle:
45 (Degree) |
|
| Splined Bore Diameter:
1.276 (Inch) |
|
| Differential Gear Install Kit | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: D44IK |
| App Model:
Dana 44 Reverse Dana 44 Standard |
|
| Taxonomy A:
LD Differential LD Differential LD Differential |
|
| Taxonomy D:
Front Rear Front Rear Front Rear |
|
| Differential Gear Install Kit | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: D44IK |
| App Model:
Dana 44 Reverse Dana 44 Standard |
|
| Taxonomy A:
LD Differential LD Differential LD Differential |
|
| Taxonomy D:
Front Rear Front Rear Front Rear |
|
| Differential Lock Washer | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: RGB5-LW |
| App Model:
63-79 Corvette Chrysler 8.75 Chrysler 9.25 Rear Dana 44 Standard GM 8.2 GM 8.875" Truck |
|
| Taxonomy A:
LD Differential LD Differential LD Differential |
|
| Differential Case Design Type:
63-79 Corvette Chrysler 8.75 Chrysler 9.25 Rear Dana 44 Standard GM 8.2 GM 8.875 Truck |
|
| Axle Shaft Seal | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: 51098 |
| App Model:
Ford 9 |
|
| Inside Diameter:
1.5 (Inch) |
|
| Material:
Nitrile |
|
| Ring Gear Bolt | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: RGBT-004 |
| App Model:
Dana AdvanTEK M186 Dana 27 Dana 28 Dana 30 Dana 30 JK Dana 30 JL Reverse Dana 30 Reverse Dana 30 TJ Dana 35 Dana 36 ICA Dana 44 Dana 44 HD Dana 44 ICA |
|
| Threads Per Inch:
24 |
|
| Thread Diameter:
.375 (Inch) |
|
| Axle Shaft Seal | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: 51098 |
| App Model:
Ford 9 |
|
| Inside Diameter:
1.5 (Inch) |
|
| Material:
Nitrile |
|
| Differential Pinion Seal | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: 5778 |
| App Model:
Dana 27 Dana 30 Reverse Dana 30 Standard Dana 30 TJ Dana 36 ICA Dana 44 ICA Dana 44 Reverse Dana 44 Standard Dana 50 |
|
| Inside Diameter:
1.552 (Inch) |
|
| Material:
Polyacrylate |
|
| Differential Pinion Shaft | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: 39194 |
| Taxonomy A:
LD Differential LD Differential LD Differential |
|
| Differential Case Design Type:
Dana 44 Reverse Dana 44 Standard |
|
| Taxonomy B:
Cross Shafts & Pins Cross Shafts & Pins Internal Gear Kits & Components |
|
| Differential Pinion Nut | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: 30185 |
| App Model:
Chrysler 8.75 Dana 27 Dana 28 Dana 30 Reverse Dana 30 Standard Dana 30 TJ Dana 36 ICA Dana 44 HD Dana 44 ICA Dana 44 Reverse Dana 44 Standard Dana 50 |
|
| Threads Per Inch:
16 |
|
| Taxonomy A:
LD Differential LD Differential LD Differential |
|
| Differential Pinion Shim Kit | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: 1104 |
| App Model:
GM 7.2 IFS GM 7.5 GM 7.6 GM 7.6 IFS GM 7.6 IRS GM 7.75 IRS GM 7.75 GM 8.2 |
|
| Inside Diameter:
1.45 (Inch) |
|
| Taxonomy A:
LD Differential LD Differential LD Differential |
|
| Differential Pinion Shim Kit | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: 1113 |
| App Model:
Dana 44 Standard |
|
| Inside Diameter:
2.25 (Inch) |
|
| Taxonomy A:
LD Differential LD Differential LD Differential |
|
| Differential Pinion Shim Kit | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: 1114 |
| App Model:
Dana 27 Dana 30 Reverse Dana 30 Standard Dana 36 ICA Dana 44 ICA Dana 44 Reverse Dana 44 Standard Dana 50 |
|
| Inside Diameter:
1.14 (Inch) |
|
| Taxonomy A:
LD Differential LD Differential LD Differential |
|
| Differential Ring and Pinion (10 Bolt) | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: D44-354 |
| Ring Gear Material:
8620 Steel |
|
| Differential Carrier Break:
3.73 Ratio and Lower |
|
| Pinion Spline Count:
26 |
|
| Differential Ring and Pinion (10 Bolt) | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: D44-456GX |
| Ring Gear Material:
8620 Steel |
|
| Differential Carrier Break:
3.73 Ratio and Lower |
|
| Pinion Spline Count:
26 |
|
| Differential Ring and Pinion (10 Bolt) | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: D44-392 |
| Ring Gear Material:
8620 Steel |
|
| Differential Carrier Break:
3.92 Ratio and Higher |
|
| Pinion Spline Count:
26 |
|
| Differential Ring and Pinion (10 Bolt) | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: D44-373 |
| Ring Gear Material:
8620 Steel |
|
| Differential Carrier Break:
3.73 Ratio and Lower |
|
| Pinion Spline Count:
26 |
|
| Differential Ring and Pinion (10 Bolt) | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: D44-427 |
| Ring Gear Material:
8620 Steel |
|
| Differential Carrier Break:
3.92 Ratio and Higher |
|
| Pinion Spline Count:
26 |
|
| Differential Ring and Pinion (10 Bolt) | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: D44-489 |
| Ring Gear Material:
8620 Steel |
|
| Differential Carrier Break:
3.92 Ratio and Higher |
|
| Pinion Spline Count:
26 |
|
| Differential Ring and Pinion (10 Bolt) | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: D44-488GX |
| Ring Gear Material:
8620 Steel |
|
| Differential Carrier Break:
3.73 Ratio and Lower |
|
| Pinion Spline Count:
26 |
|
| Differential Ring and Pinion (10 Bolt) | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: D44-513GX |
| Ring Gear Material:
8620 Steel |
|
| Differential Carrier Break:
3.73 Ratio and Lower |
|
| Pinion Spline Count:
26 |
|
| Differential Ring and Pinion (10 Bolt) | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: D44-538 |
| Ring Gear Material:
8620 Steel |
|
| Differential Carrier Break:
3.92 Ratio and Higher |
|
| Pinion Spline Count:
26 |
|
| Differential Ring and Pinion (10 Bolt) | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: D44-307 |
| Ring Gear Material:
8620 Steel |
|
| Differential Carrier Break:
3.73 Ratio and Lower |
|
| Pinion Spline Count:
26 |
|
| Differential Ring and Pinion (10 Bolt) | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: D44-456 |
| Ring Gear Material:
8620 Steel |
|
| Differential Carrier Break:
3.92 Ratio and Higher |
|
| Pinion Spline Count:
26 |
|
| Differential Ring and Pinion (10 Bolt) | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: D44-513 |
| Ring Gear Material:
8620 Steel |
|
| Differential Carrier Break:
3.92 Ratio and Higher |
|
| Pinion Spline Count:
26 |
|
| Differential Ring and Pinion (10 Bolt) | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: D44-589 |
| Ring Gear Material:
8620 Steel |
|
| Differential Carrier Break:
3.92 Ratio and Higher |
|
| Pinion Spline Count:
26 |
|
| Differential Ring and Pinion (10 Bolt) | Manufactured by Motive Gear |
| Warranty Period: 1 Year or 50,000 Miles | Part #: D44-538X |
| Ring Gear Material:
8620 Steel |
|
| Differential Carrier Break:
3.73 Ratio and Lower |
|
| Pinion Spline Count:
26 |
|
Showing 1 – 30 of 34