Differential Ring and Pinion (10, 10)

Motive Gear stock performance ring and pinions are excellent replacements for OE. Experienced installers prefer our ring and pinions for easy setup, superior strength, quality, and our vast ratio selection. Motive Gear produces the industry's widest range of OEM replacement ring and pinions. Engineered to the highest standards, every Motive Gear product goes through rigid quality control processes in our in-house lab. In combination with Motive Gear's performance and axle divisions: Motive Gear Performance and TEN Factory, there simply isn't a better value in drivetrain components.

D44-488GX Application Notes

Warranty

1 Year or 50,000 Miles

D44-488GX Specifications

App Model Dana 44 ICA, Dana 44 Standard

Cover Bolt Quantity 10, 10

Differential Carrier Break 3.73 Ratio and Lower, 3.73 Ratio and Lower

Differential Case Design Type Dana 44 Standard, Dana 44 ICA, Dana 44 Standard

Gear Ratio 4.88, 4.88

Pinion Gear Tooth Quantity 8, 8

Pinion Shaft Diameter 1.376 (Inch), 1.376 (Inch)

Pinion Spline Count 26, 26

Position Front, Rear

Prop 65 Long Label WARNING: Reproductive Harm - www.p65warnings.ca.gov

Prop 65 Short Label WARNING: Cancer - www.p65warnings.ca.gov

Prop 65 Y N N

Ratio 4.88

Ring Gear Bolt Quantity 10, 10

Ring Gear Material 8620 Steel, 8620 Steel

Ring Gear Outside Diameter 8.5 (Inch), 8.5 (Inch)

Ring Gear Rotation Standard, Standard

Ring Gear Tooth Quantity 39, 39

Taxonomy A LD Differential, LD Differential, LD Differential, LD Differential

Taxonomy B Ring and Pinion, Ring and Pinion, Ring and Pinion

Taxonomy C Front, Rear, Front, Rear, Front, Rear

Taxonomy D 4.88, 4.88, 4.88

Where to buy

Vehicle Applications

1967 Chevrolet C10 Panel
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1967 – 1968 Chevrolet C10 Pickup
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1984 – 1985 Chevrolet Camaro
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1992 – 1994 Chevrolet Camaro
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1980 – 1982 Chevrolet Corvette
Application notes:
- For Dana 44 ICA
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1960 – 1966 Chevrolet Suburban
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1948 – 1952 Ford F-1
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1953 Ford F-100
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1975 – 1979 Ford F-100
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1970 – 1972 Ford Royal
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1967 – 1968 GMC C15/C1500 Pickup
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1968 GMC C15/C1500 Suburban
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1960 – 1966 GMC Suburban
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1974 International 100
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1966 International 1100A
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1967 International 1100B
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1968 International 1100C
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1969 – 1970 International 1100D
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1971 – 1973 International 1110
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1966 International 1200A
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1967 International 1200B
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1968 International 1200C
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1969 – 1970 International 1200D
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1971 – 1973 International 1210
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1974 – 1975 International 150
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1974 – 1975 International 200
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1968 – 1971 International Scout
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1971 – 1980 International Scout II
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1993 – 1997 Isuzu Rodeo
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1955 – 1967 Jaguar 2.4
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1967 – 1969 Jaguar 240
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1957 – 1968 Jaguar 3.4
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1960 – 1969 Jaguar 3.8
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1967 – 1970 Jaguar 340
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1967 – 1968 Jaguar 420
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1955 – 1959 Jaguar Mark 1
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1960 – 1968 Jaguar Mark 2
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1959 – 1961 Jaguar Mark IX
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1962 – 1966 Jaguar Mark X
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1968 – 1971 Jaguar XJ
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1972 – 1997 Jaguar XJ6
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1976 – 1996 Jaguar XJS
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1997 – 2006 Jaguar XK8
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1960 – 1983 Jeep CJ5
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1966 – 1968 Jeep CJ5A
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1966 – 1975 Jeep CJ6
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1966 – 1968 Jeep CJ6A
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1986 Jeep CJ7
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1974 – 1993 Jeep Cherokee
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1986 – 1992 Jeep Comanche
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1966 – 1973 Jeep Commando
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1984 – 1991 Jeep Grand Wagoneer
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1993 Jeep Grand Wagoneer
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1967 – 1973 Jeep J-100
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1974 – 1988 Jeep J10
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1974 – 1977 Jeep J20
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1979 – 1988 Jeep J20
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1966 – 1971 Jeep Jeepster
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1981 – 1985 Jeep Scrambler
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1997 – 2006 Jeep TJ
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1987 – 1995 Jeep Wrangler
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1997 – 2006 Jeep Wrangler
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts
1963 – 1967 Shelby Cobra
Application notes:
- For Dana 44
- 4.88 Ratio
- Thick Ring Gear
- Requires a 3.73 and Numerically Lower Ratio Carrier
- Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

Installation

Installation Instructions

⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov