Differential Ring and Pinon Front and Rear Complete Kit (10, 10)

5656

Motive Gear makes it easy to re-gear your 4x4! Motive Gear complete front and rear differential kit includes: front and rear ring and pinions, plus front and rear bearing kits. Everything you need when changing tire size on your off-road vehicle.

MGK-120 Application Notes

Warranty

1 Year or 50,000 Miles

MGK-120 Specifications

App Model Dana 30 Reverse, Dana 35
Cover Bolt Quantity 10, 10
Differential Carrier Break 3.73 Ratio and Higher Front, 3.54 Ratio and Higher Rear, 3.73 Ratio and Higher Front, 3.54 Ratio and Higher Rear
Differential Case Design Type Dana 30 Reverse, Dana 35, Dana 30 Reverse, Dana 35
Gear Ratio 4.10, 4.11, 4.1, 4.11
Pinion Gear Tooth Quantity 10, 10
Pinion Shaft Diameter 1.375 (Inch), 1.375 (Inch)
Pinion Spline Count 26, 26
Position Front and Rear
Prop 65 Long Label WARNING: Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Short Label WARNING: Cancer - www.p65warnings.ca.gov
Prop 65 Y N N
Ratio 4.10
Ring Gear Bolt Quantity 10 Front, 8 Rear, 10 Front, 8 Rear
Ring Gear Material 8620 Steel, 8620 Steel
Ring Gear Outside Diameter 7.125 Front (Inch), 7.5 Rear (Inch), 7.125 Front (Inch), 7.5 Rear (Inch)
Ring Gear Rotation Reverse Front, Standard Rear, Reverse Front, Standard Rear
Ring Gear Tooth Quantity 41, 41
Taxonomy A LD Differential, LD Differential, LD Differential, LD Differential
Taxonomy B Ring and Pinion Gear Packages, Ring and Pinion Gear Packages, Ring and Pinion Gear Packages
Taxonomy C Front and Rear, Front and Rear, Front and Rear
Taxonomy D 4.10, 4.10, 4.10
Where to buy

Vehicle Applications

  • 1987 – 1990 Chevrolet Calypso

    Application notes:

    • For Dana 30 Front and Dana 35 Rear - Ring and Pinions Including Timken Bearing Kits
    • 4.10/4.11 Ratio
    • Requires 3.73 and Higher Front Carrier
    • Requires 3.54 and Higher Rear Carrier
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front and Rear Carrier
  • 1987 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear - Ring and Pinions Including Timken Bearing Kits
    • 4.10/4.11 Ratio
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front and Rear Carrier
  • 1988 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear - Ring and Pinions Including Timken Bearing Kits
    • 4.10/4.11 Ratio
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front and Rear Carrier
  • 1989 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear - Ring and Pinions Including Timken Bearing Kits
    • 4.10/4.11 Ratio
    • Requires 3.73 and Higher Front Carrier
    • Requires 3.54 and Higher Rear Carrier
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front and Rear Carrier
  • 1989 – 1990 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear - Ring and Pinions Including Timken Bearing Kits
    • 4.10/4.11 Ratio
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front and Rear Carrier
  • 1990 – 1991 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear - Ring and Pinions Including Timken Bearing Kits
    • 4.10/4.11 Ratio
    • Requires 3.73 and Higher Front Carrier
    • Requires 3.54 and Higher Rear Carrier
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front and Rear Carrier
  • 1991 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear - Ring and Pinions Including Timken Bearing Kits
    • 4.10/4.11 Ratio
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front and Rear Carrier
  • 1992 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear - Ring and Pinions Including Timken Bearing Kits
    • 4.10/4.11 Ratio
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front and Rear Carrier
  • 1993 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear - Ring and Pinions Including Timken Bearing Kits
    • 4.10/4.11 Ratio
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front and Rear Carrier
  • 1994 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear - Ring and Pinions Including Timken Bearing Kits
    • 4.10/4.11 Ratio
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front and Rear Carrier
  • 1995 Jeep Wrangler

    Application notes:

    • For Dana 30 Front and Dana 35 Rear - Ring and Pinions Including Timken Bearing Kits
    • 4.10/4.11 Ratio
    • If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier
    • If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front and Rear Carrier

Installation

Installation Instructions
⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov