Differential Ring and Pinion (Dropout, Dropout)

146009
146010
146011
146012
7321

Motive Gear stock performance ring and pinions are excellent replacements for OE. Experienced installers prefer our ring and pinions for easy setup, superior strength, quality, and our vast ratio selection. Motive Gear produces the industry's widest range of OEM replacement ring and pinions. Engineered to the highest standards, every Motive Gear product goes through rigid quality control processes in our in-house lab. In combination with Motive Gear's performance and axle divisions: Motive Gear Performance and TEN Factory, there simply isn't a better value in drivetrain components.

T488L Application Notes

Warranty

1 Year or 50,000 Miles

T488L Specifications

App Model Toyota 9.5
Cover Bolt Quantity Dropout, Dropout
Differential Case Design Type Toyota 9.5, Toyota 9.5
Gear Ratio 4.88, 4.88
Pinion Gear Tooth Quantity 8, 8
Pinion Shaft Diameter 1.57 (Inch), 1.57 (Inch)
Pinion Spline Count 27, 27
Position Front, Rear
Prop 65 Long Label WARNING: Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Short Label WARNING: Cancer - www.p65warnings.ca.gov
Prop 65 Y N N
Ratio 4.88
Ring Gear Bolt Quantity 12, 12
Ring Gear Material 8620 Steel, 8620 Steel
Ring Gear Outside Diameter 9.25 (Inch), 9.25 (Inch)
Ring Gear Rotation Standard, Standard
Ring Gear Tooth Quantity 39, 39
Taxonomy A LD Differential, LD Differential, LD Differential, LD Differential
Taxonomy B Ring and Pinion, Ring and Pinion, Ring and Pinion
Taxonomy C Front, Rear, Front, Rear, Front, Rear
Taxonomy D 4.88, 4.88, 4.88
Where to buy

Vehicle Applications

  • 1977 – 1981 Chrysler Comet

    Application notes:

    • For Toyota 9.5"
    • 4.88 Ratio
    • 1969-1978 Applications Require A 27 Spline Pinion Flange
    • Some Later Applications May Require Purchase Of Factory Bolt and Nut Kit, Requires Crush Sleeve PN[41231-60010]
    • Front or Rear - FJ40, FJ45, FJ55, FJ60, HJ60, FJ62, BJ70
    • Rear - FJ80, FJZ80, HDJ80, HZJ80, HZJ81
  • 1968 Toyota Land Cruiser
  • 1969 Toyota Land Cruiser

    Application notes:

    • For Toyota 9.5"
    • 4.88 Ratio
    • 1969-1978 Applications Require A 27 Spline Pinion Flange
    • Some Later Applications May Require Purchase Of Factory Bolt and Nut Kit, Requires Crush Sleeve PN[41231-60010]
    • Front or Rear - FJ40, FJ45, FJ55, FJ60, HJ60, FJ62, BJ70
    • Rear - FJ80, FJZ80, HDJ80, HZJ80, HZJ81
  • 1969 – 1970 Toyota Land Cruiser
  • 1970 Toyota Land Cruiser

    Application notes:

    • For Toyota 9.5"
    • 4.88 Ratio
    • 1969-1978 Applications Require A 27 Spline Pinion Flange
    • Some Later Applications May Require Purchase Of Factory Bolt and Nut Kit, Requires Crush Sleeve PN[41231-60010]
    • Front or Rear - FJ40, FJ45, FJ55, FJ60, HJ60, FJ62, BJ70
    • Rear - FJ80, FJZ80, HDJ80, HZJ80, HZJ81
  • 1971 Toyota Land Cruiser
  • 1971 – 1972 Toyota Land Cruiser

    Application notes:

    • For Toyota 9.5"
    • 4.88 Ratio
    • 1969-1978 Applications Require A 27 Spline Pinion Flange
    • Some Later Applications May Require Purchase Of Factory Bolt and Nut Kit, Requires Crush Sleeve PN[41231-60010]
    • Front or Rear - FJ40, FJ45, FJ55, FJ60, HJ60, FJ62, BJ70
    • Rear - FJ80, FJZ80, HDJ80, HZJ80, HZJ81
  • 1972 Toyota Land Cruiser
  • 1973 Toyota Land Cruiser
  • 1974 Toyota Land Cruiser
  • 1975 Toyota Land Cruiser
  • 1976 Toyota Land Cruiser
  • 1977 Toyota Land Cruiser

    Application notes:

    • For Toyota 9.5"
    • 4.88 Ratio
    • 1969-1978 Applications Require A 27 Spline Pinion Flange
    • Some Later Applications May Require Purchase Of Factory Bolt and Nut Kit, Requires Crush Sleeve PN[41231-60010]
    • Front or Rear - FJ40, FJ45, FJ55, FJ60, HJ60, FJ62, BJ70
    • Rear - FJ80, FJZ80, HDJ80, HZJ80, HZJ81
  • 1977 – 1978 Toyota Land Cruiser
  • 1978 – 1979 Toyota Land Cruiser

    Application notes:

    • For Toyota 9.5"
    • 4.88 Ratio
    • 1969-1978 Applications Require A 27 Spline Pinion Flange
    • Some Later Applications May Require Purchase Of Factory Bolt and Nut Kit, Requires Crush Sleeve PN[41231-60010]
    • Front or Rear - FJ40, FJ45, FJ55, FJ60, HJ60, FJ62, BJ70
    • Rear - FJ80, FJZ80, HDJ80, HZJ80, HZJ81
  • 1979 Toyota Land Cruiser
  • 1980 Toyota Land Cruiser
  • 1981 Toyota Land Cruiser

    Application notes:

    • For Toyota 9.5"
    • 4.88 Ratio
    • 1969-1978 Applications Require A 27 Spline Pinion Flange
    • Some Later Applications May Require Purchase Of Factory Bolt and Nut Kit, Requires Crush Sleeve PN[41231-60010]
    • Front or Rear - FJ40, FJ45, FJ55, FJ60, HJ60, FJ62, BJ70
    • Rear - FJ80, FJZ80, HDJ80, HZJ80, HZJ81
  • 1981 – 1982 Toyota Land Cruiser
  • 1982 – 1983 Toyota Land Cruiser

    Application notes:

    • For Toyota 9.5"
    • 4.88 Ratio
    • 1969-1978 Applications Require A 27 Spline Pinion Flange
    • Some Later Applications May Require Purchase Of Factory Bolt and Nut Kit, Requires Crush Sleeve PN[41231-60010]
    • Front or Rear - FJ40, FJ45, FJ55, FJ60, HJ60, FJ62, BJ70
    • Rear - FJ80, FJZ80, HDJ80, HZJ80, HZJ81
  • 1983 Toyota Land Cruiser
  • 1984 Toyota Land Cruiser

    Application notes:

    • For Toyota 9.5"
    • 4.88 Ratio
    • 1969-1978 Applications Require A 27 Spline Pinion Flange
    • Some Later Applications May Require Purchase Of Factory Bolt and Nut Kit, Requires Crush Sleeve PN[41231-60010]
    • Front or Rear - FJ40, FJ45, FJ55, FJ60, HJ60, FJ62, BJ70
    • Rear - FJ80, FJZ80, HDJ80, HZJ80, HZJ81
  • 1984 – 1985 Toyota Land Cruiser
  • 1985 – 1986 Toyota Land Cruiser

    Application notes:

    • For Toyota 9.5"
    • 4.88 Ratio
    • 1969-1978 Applications Require A 27 Spline Pinion Flange
    • Some Later Applications May Require Purchase Of Factory Bolt and Nut Kit, Requires Crush Sleeve PN[41231-60010]
    • Front or Rear - FJ40, FJ45, FJ55, FJ60, HJ60, FJ62, BJ70
    • Rear - FJ80, FJZ80, HDJ80, HZJ80, HZJ81
  • 1986 – 1987 Toyota Land Cruiser
  • 1987 – 1988 Toyota Land Cruiser

    Application notes:

    • For Toyota 9.5"
    • 4.88 Ratio
    • 1969-1978 Applications Require A 27 Spline Pinion Flange
    • Some Later Applications May Require Purchase Of Factory Bolt and Nut Kit, Requires Crush Sleeve PN[41231-60010]
    • Front or Rear - FJ40, FJ45, FJ55, FJ60, HJ60, FJ62, BJ70
    • Rear - FJ80, FJZ80, HDJ80, HZJ80, HZJ81
  • 1988 Toyota Land Cruiser
  • 1989 Toyota Land Cruiser
  • 1990 Toyota Land Cruiser

    Application notes:

    • For Toyota 9.5"
    • 4.88 Ratio
    • 1969-1978 Applications Require A 27 Spline Pinion Flange
    • Some Later Applications May Require Purchase Of Factory Bolt and Nut Kit, Requires Crush Sleeve PN[41231-60010]
    • Front or Rear - FJ40, FJ45, FJ55, FJ60, HJ60, FJ62, BJ70
    • Rear - FJ80, FJZ80, HDJ80, HZJ80, HZJ81
  • 1990 – 1991 Toyota Land Cruiser
  • 1991 – 1992 Toyota Land Cruiser

    Application notes:

    • For Toyota 9.5"
    • 4.88 Ratio
    • 1969-1978 Applications Require A 27 Spline Pinion Flange
    • Some Later Applications May Require Purchase Of Factory Bolt and Nut Kit, Requires Crush Sleeve PN[41231-60010]
    • Front or Rear - FJ40, FJ45, FJ55, FJ60, HJ60, FJ62, BJ70
    • Rear - FJ80, FJZ80, HDJ80, HZJ80, HZJ81
  • 1992 – 1993 Toyota Land Cruiser
  • 1993 – 1994 Toyota Land Cruiser

    Application notes:

    • For Toyota 9.5"
    • 4.88 Ratio
    • 1969-1978 Applications Require A 27 Spline Pinion Flange
    • Some Later Applications May Require Purchase Of Factory Bolt and Nut Kit, Requires Crush Sleeve PN[41231-60010]
    • Front or Rear - FJ40, FJ45, FJ55, FJ60, HJ60, FJ62, BJ70
    • Rear - FJ80, FJZ80, HDJ80, HZJ80, HZJ81
  • 1994 Toyota Land Cruiser
  • 1995 Toyota Land Cruiser

    Application notes:

    • For Toyota 9.5"
    • 4.88 Ratio
    • 1969-1978 Applications Require A 27 Spline Pinion Flange
    • Some Later Applications May Require Purchase Of Factory Bolt and Nut Kit, Requires Crush Sleeve PN[41231-60010]
    • Front or Rear - FJ40, FJ45, FJ55, FJ60, HJ60, FJ62, BJ70
    • Rear - FJ80, FJZ80, HDJ80, HZJ80, HZJ81
  • 1995 – 1996 Toyota Land Cruiser
  • 1996 – 1997 Toyota Land Cruiser

    Application notes:

    • For Toyota 9.5"
    • 4.88 Ratio
    • 1969-1978 Applications Require A 27 Spline Pinion Flange
    • Some Later Applications May Require Purchase Of Factory Bolt and Nut Kit, Requires Crush Sleeve PN[41231-60010]
    • Front or Rear - FJ40, FJ45, FJ55, FJ60, HJ60, FJ62, BJ70
    • Rear - FJ80, FJZ80, HDJ80, HZJ80, HZJ81
  • 1997 Toyota Land Cruiser
  • 1998 Toyota Land Cruiser

    Application notes:

    • For Toyota 9.5"
    • 4.88 Ratio
    • 1969-1978 Applications Require A 27 Spline Pinion Flange
    • Some Later Applications May Require Purchase Of Factory Bolt and Nut Kit, Requires Crush Sleeve PN[41231-60010]
    • Front or Rear - FJ40, FJ45, FJ55, FJ60, HJ60, FJ62, BJ70
    • Rear - FJ80, FJZ80, HDJ80, HZJ80, HZJ81
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov