Differential Master Bearing Kit - Koyo

5147
5149

R7.5FRMK Application Notes

Warranty

1 Year or 50,000 Miles

R7.5FRMK Specifications

App Model Ford 7.5
Differential Case Design Type Ford 7.5, Ford 7.5
Position Rear
Prop 65 Long Label WARNING: Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Short Label WARNING: Cancer - www.p65warnings.ca.gov
Prop 65 Y N N
Taxonomy A LD Differential, LD Differential, LD Differential, LD Differential
Taxonomy B Differential Rebuild Kits, Differential Rebuild Kits, Differential Rebuild Kits
Taxonomy C Master Bearing Kits, Master Bearing Kits, Master Bearing Kits
Taxonomy D Rear, Rear, Rear
Where to buy

Vehicle Applications

  • 1986 – 1990 Ford Aerostar

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1990 – 1991 Ford Aerostar

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1991 – 1992 Ford Aerostar

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1992 Ford Aerostar

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1993 Ford Aerostar

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1994 Ford Aerostar

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1994 – 1995 Ford Aerostar

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1995 Ford Aerostar

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1996 Ford Aerostar

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1997 Ford Aerostar

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1984 Ford Bronco II

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1984 – 1985 Ford Bronco II

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1985 – 1986 Ford Bronco II

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1986 Ford Bronco II

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1987 Ford Bronco II

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1988 Ford Bronco II

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1988 – 1989 Ford Bronco II

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1989 Ford Bronco II

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1990 Ford Bronco II

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1991 – 1994 Ford Explorer

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1978 Ford Fairmont

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 Ford Fairmont

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 Ford Fairmont

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1981 Ford Fairmont

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1981 – 1982 Ford Fairmont

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 – 1983 Ford Fairmont

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1983 Ford Fairmont

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1981 Ford Granada

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1981 – 1982 Ford Granada

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 Ford Granada

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1979 – 1986 Ford LTD

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1979 – 1980 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1981 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1982 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1983 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 – 1984 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1984 – 1985 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1985 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1986 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1986 – 1987 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1987 – 1988 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1988 – 1989 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1989 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1990 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1990 – 1991 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1991 – 1992 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1992 – 1993 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1993 – 1994 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1994 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1995 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1995 – 1996 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1996 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1997 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1997 – 1998 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1998 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1999 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 2000 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 2000 – 2001 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 2001 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 2002 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 2003 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 2003 – 2004 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 2004 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 2005 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 2006 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 2007 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 2007 – 2008 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 2008 – 2009 Ford Mustang

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 2009 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 2010 Ford Mustang

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 – 1984 Ford Ranger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1984 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1985 Ford Ranger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1985 – 1986 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1986 – 1987 Ford Ranger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1987 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1988 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1989 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1990 Ford Ranger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1991 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1991 – 1992 Ford Ranger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1992 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1993 Ford Ranger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1994 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1994 – 1995 Ford Ranger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1995 – 1996 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1996 – 1997 Ford Ranger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1997 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1997 – 1998 Ford Ranger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1998 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1998 – 1999 Ford Ranger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1999 – 2000 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 2000 – 2001 Ford Ranger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 2001 – 2002 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 2002 – 2003 Ford Ranger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 2003 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 2004 Ford Ranger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 2004 – 2005 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 2005 Ford Ranger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 2006 Ford Ranger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 2007 Ford Ranger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 2008 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 2008 – 2009 Ford Ranger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 2009 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 2010 Ford Ranger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 2010 – 2011 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 2011 Ford Ranger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 2012 – 2013 Ford Ranger

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 Ford Thunderbird

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1980 – 1981 Ford Thunderbird

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1981 Ford Thunderbird

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1982 Ford Thunderbird

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 – 1983 Ford Thunderbird

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1983 Ford Thunderbird

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1984 Ford Thunderbird

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1984 – 1985 Ford Thunderbird

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1985 Ford Thunderbird

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1986 Ford Thunderbird

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1986 – 1987 Ford Thunderbird

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1987 – 1988 Ford Thunderbird

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1988 Ford Thunderbird

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1989 Ford Thunderbird

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1990 Ford Thunderbird

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1991 Ford Thunderbird

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1991 – 1992 Ford Thunderbird

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1992 – 1993 Ford Thunderbird

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1993 – 1994 Ford Thunderbird

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1994 – 1995 Ford Thunderbird

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1995 – 1996 Ford Thunderbird

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1996 Ford Thunderbird

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1997 Ford Thunderbird

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 – 1987 Lincoln Continental

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1984 Lincoln Mark VII

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1984 – 1985 Lincoln Mark VII

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1985 – 1986 Lincoln Mark VII

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1986 Lincoln Mark VII

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1987 Lincoln Mark VII

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1994 – 1997 Mazda B2300

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1998 – 2001 Mazda B2500

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1994 – 1997 Mazda B3000

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1994 – 1997 Mazda B4000

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 Mercury Capri

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1979 – 1980 Mercury Capri

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 – 1981 Mercury Capri

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1981 Mercury Capri

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 Mercury Capri

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 Mercury Capri

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1983 – 1984 Mercury Capri

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1984 Mercury Capri

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1985 Mercury Capri

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1986 Mercury Capri

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1980 Mercury Cougar

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1981 Mercury Cougar

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1981 – 1982 Mercury Cougar

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 Mercury Cougar

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1983 Mercury Cougar

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1984 Mercury Cougar

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1985 Mercury Cougar

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1986 Mercury Cougar

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1987 Mercury Cougar

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1988 Mercury Cougar

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1989 Mercury Cougar

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1989 – 1990 Mercury Cougar

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1990 Mercury Cougar

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1991 Mercury Cougar

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1991 – 1992 Mercury Cougar

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1992 Mercury Cougar

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1993 Mercury Cougar

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1993 – 1994 Mercury Cougar

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1994 Mercury Cougar

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1995 Mercury Cougar

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1996 Mercury Cougar

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1996 – 1997 Mercury Cougar

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1997 Mercury Cougar

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1979 – 2011 Mercury Grand Marquis

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 – 1980 Mercury Marquis

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1981 Mercury Marquis

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1981 – 1982 Mercury Marquis

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 Mercury Marquis

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1983 Mercury Marquis

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 – 1984 Mercury Marquis

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1984 Mercury Marquis

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1985 Mercury Marquis

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1985 – 1986 Mercury Marquis

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1986 Mercury Marquis

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1979 – 1980 Mercury Monarch

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1978 Mercury Zephyr

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 Mercury Zephyr

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1979 – 1980 Mercury Zephyr

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 – 1981 Mercury Zephyr

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1981 – 1982 Mercury Zephyr

    Application notes:

    • For Ford 7.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 Mercury Zephyr

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1983 Mercury Zephyr

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
  • 1980 – 1982 Plymouth Badger

    Application notes:

    • 7.5 In. Ring Gear
    • Standard Design
⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov