Differential Master Bearing Kit - Koyo

3375
3377

R10RMK Application Notes

Warranty

1 Year or 50,000 Miles

R10RMK Specifications

App Model GM 8.5
Differential Case Design Type GM 8.5, GM 8.5
Position Front, Rear
Prop 65 Long Label WARNING: Reproductive Harm - www.p65warnings.ca.gov
Prop 65 Short Label WARNING: Cancer - www.p65warnings.ca.gov
Prop 65 Y N N
Taxonomy A LD Differential, LD Differential, LD Differential, LD Differential
Taxonomy B Differential Rebuild Kits, Differential Rebuild Kits, Differential Rebuild Kits
Taxonomy C Master Bearing Kits, Master Bearing Kits, Master Bearing Kits
Taxonomy D Front, Rear, Front, Rear, Front, Rear
Where to buy

Vehicle Applications

  • 1973 Buick Apollo

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1974 Buick Apollo

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1974 – 1975 Buick Apollo

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1975 Buick Apollo

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 – 1973 Buick Centurion

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 Buick Century

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1974 Buick Century

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1974 – 1975 Buick Century

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1975 Buick Century

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1976 Buick Century

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1976 – 1977 Buick Century

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 Buick Century

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1991 – 1996 Buick Commercial Chassis

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 Buick Electra

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1974 Buick Electra

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1975 Buick Electra

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1975 – 1976 Buick Electra

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1976 Buick Electra

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 Buick Electra

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1978 Buick Electra

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 Buick Electra

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 Buick Electra

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1981 Buick Electra

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 Buick Electra

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1982 – 1983 Buick Electra

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 – 1984 Buick Electra

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1984 Buick Electra

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 Buick Estate Wagon

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1974 Buick Estate Wagon

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1975 Buick Estate Wagon

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1976 Buick Estate Wagon

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1976 – 1977 Buick Estate Wagon

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 – 1978 Buick Estate Wagon

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1978 Buick Estate Wagon

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 Buick Estate Wagon

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 – 1972 Buick GS

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 – 1972 Buick GS 455

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 – 1985 Buick LeSabre

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1985 – 1990 Buick LeSabre

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 Buick Regal

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1974 Buick Regal

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1974 – 1975 Buick Regal

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1975 – 1976 Buick Regal

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1976 – 1977 Buick Regal

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 Buick Regal

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1978 Buick Regal

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1978 – 1979 Buick Regal

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 – 1980 Buick Regal

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1980 Buick Regal

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1981 Buick Regal

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1981 – 1982 Buick Regal

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 – 1983 Buick Regal

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1983 Buick Regal

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1984 – 1987 Buick Regal

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 – 1978 Buick Riviera

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1991 – 1996 Buick Roadmaster

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 Buick Skylark

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1971 – 1972 Buick Skylark

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1972 Buick Skylark

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1975 Buick Skylark

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1976 Buick Skylark

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 Buick Skylark

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 – 1978 Buick Skylark

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1978 Buick Skylark

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 Buick Skylark

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1987 Cadillac Brougham

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1988 Cadillac Brougham

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1989 Cadillac Brougham

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1990 Cadillac Brougham

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1991 Cadillac Brougham

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1991 – 1992 Cadillac Brougham

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1992 Cadillac Brougham

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 – 1996 Cadillac Commercial Chassis

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 Cadillac DeVille

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1978 Cadillac DeVille

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1978 – 1979 Cadillac DeVille

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1979 Cadillac DeVille

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 Cadillac DeVille

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1980 – 1981 Cadillac DeVille

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1981 Cadillac DeVille

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1982 Cadillac DeVille

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1983 Cadillac DeVille

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 – 1984 Cadillac DeVille

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1984 Cadillac DeVille

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1999 – 2000 Cadillac Escalade

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 – 1987 Cadillac Fleetwood

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1993 – 1996 Cadillac Fleetwood

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1970 – 1975 Chevrolet Bel Air

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 Chevrolet Biscayne

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 – 1972 Chevrolet Biscayne

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1972 Chevrolet Biscayne

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1987 Chevrolet Blazer

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1987 – 1988 Chevrolet Blazer

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1988 Chevrolet Blazer

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1989 Chevrolet Blazer

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1989 – 1990 Chevrolet Blazer

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1990 – 1991 Chevrolet Blazer

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1991 Chevrolet Blazer

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1992 Chevrolet Blazer

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1993 Chevrolet Blazer

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1993 – 1994 Chevrolet Blazer

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1994 – 1995 Chevrolet Blazer

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1995 – 1996 Chevrolet Blazer

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1996 – 1997 Chevrolet Blazer

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1997 Chevrolet Blazer

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1998 Chevrolet Blazer

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1998 – 1999 Chevrolet Blazer

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1975 Chevrolet C10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1976 Chevrolet C10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 Chevrolet C10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 – 1978 Chevrolet C10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1978 – 1979 Chevrolet C10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1979 – 1980 Chevrolet C10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 – 1981 Chevrolet C10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1981 Chevrolet C10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 Chevrolet C10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1982 – 1983 Chevrolet C10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 – 1984 Chevrolet C10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1984 – 1985 Chevrolet C10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1985 Chevrolet C10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1986 Chevrolet C10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1971 Chevrolet C10 Pickup

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 – 1972 Chevrolet C10 Pickup

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1972 Chevrolet C10 Pickup

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 Chevrolet C10 Pickup

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1974 Chevrolet C10 Pickup

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 – 1982 Chevrolet C10 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 Chevrolet C10 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1983 Chevrolet C10 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 – 1984 Chevrolet C10 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1984 Chevrolet C10 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1985 Chevrolet C10 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1985 – 1986 Chevrolet C10 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1986 Chevrolet C10 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1988 Chevrolet C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1989 Chevrolet C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1990 Chevrolet C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1991 Chevrolet C1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1991 – 1992 Chevrolet C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1992 – 1993 Chevrolet C1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1993 Chevrolet C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1994 Chevrolet C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1995 Chevrolet C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1996 Chevrolet C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1997 Chevrolet C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1998 Chevrolet C1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1998 – 1999 Chevrolet C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1999 Chevrolet C1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1992 Chevrolet C1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1993 Chevrolet C1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1993 – 1994 Chevrolet C1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1994 Chevrolet C1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1995 Chevrolet C1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1995 – 1996 Chevrolet C1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1996 Chevrolet C1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1997 Chevrolet C1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1998 Chevrolet C1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1999 Chevrolet C1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 – 1986 Chevrolet C20 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1988 – 1991 Chevrolet C2500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1992 – 1996 Chevrolet C2500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1970 Chevrolet Camaro

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1970 – 1971 Chevrolet Camaro

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1971 Chevrolet Camaro

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1972 Chevrolet Camaro

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 Chevrolet Camaro

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1973 – 1974 Chevrolet Camaro

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1974 – 1975 Chevrolet Camaro

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1975 Chevrolet Camaro

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1976 Chevrolet Camaro

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 Chevrolet Camaro

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1978 Chevrolet Camaro

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 Chevrolet Camaro

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1979 – 1980 Chevrolet Camaro

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 – 1981 Chevrolet Camaro

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1981 Chevrolet Camaro

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1970 – 1973 Chevrolet Caprice

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 – 1974 Chevrolet Caprice

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1974 – 1975 Chevrolet Caprice

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1975 Chevrolet Caprice

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1976 Chevrolet Caprice

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1976 – 1977 Chevrolet Caprice

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 – 1978 Chevrolet Caprice

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1978 – 1979 Chevrolet Caprice

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1979 Chevrolet Caprice

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 Chevrolet Caprice

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1980 – 1981 Chevrolet Caprice

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1981 Chevrolet Caprice

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1982 Chevrolet Caprice

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 – 1983 Chevrolet Caprice

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1983 – 1984 Chevrolet Caprice

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1984 – 1985 Chevrolet Caprice

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1985 Chevrolet Caprice

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1986 Chevrolet Caprice

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1986 – 1987 Chevrolet Caprice

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1987 – 1988 Chevrolet Caprice

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1988 Chevrolet Caprice

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1989 Chevrolet Caprice

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1989 – 1990 Chevrolet Caprice

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1990 Chevrolet Caprice

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1991 Chevrolet Caprice

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1991 – 1992 Chevrolet Caprice

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1992 Chevrolet Caprice

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1993 Chevrolet Caprice

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1994 Chevrolet Caprice

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1994 – 1995 Chevrolet Caprice

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1995 Chevrolet Caprice

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1996 Chevrolet Caprice

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1970 – 1973 Chevrolet Chevelle

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 Chevrolet Chevelle

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1991 – 1994 Chevrolet Commercial Chassis

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1970 – 1971 Chevrolet El Camino

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 Chevrolet El Camino

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1972 – 1980 Chevrolet El Camino

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1981 Chevrolet El Camino

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 Chevrolet El Camino

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1982 – 1983 Chevrolet El Camino

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 Chevrolet El Camino

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1984 Chevrolet El Camino

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1985 Chevrolet El Camino

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1986 Chevrolet El Camino

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1986 – 1987 Chevrolet El Camino

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1987 Chevrolet El Camino

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1996 Chevrolet Express 1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1996 – 1997 Chevrolet Express 1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1997 Chevrolet Express 1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1998 Chevrolet Express 1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1999 Chevrolet Express 1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1996 Chevrolet Express 2500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1975 – 1977 Chevrolet G10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 – 1978 Chevrolet G10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1978 Chevrolet G10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 Chevrolet G10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1979 – 1980 Chevrolet G10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 – 1981 Chevrolet G10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1981 – 1982 Chevrolet G10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 Chevrolet G10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1983 Chevrolet G10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1984 Chevrolet G10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1984 – 1985 Chevrolet G10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1985 Chevrolet G10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1986 Chevrolet G10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1987 Chevrolet G10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1987 – 1988 Chevrolet G10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1988 Chevrolet G10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1989 Chevrolet G10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1989 – 1990 Chevrolet G10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1990 Chevrolet G10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1991 Chevrolet G10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1991 – 1992 Chevrolet G10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1992 – 1993 Chevrolet G10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1993 – 1994 Chevrolet G10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1994 Chevrolet G10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1995 Chevrolet G10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1970 – 1974 Chevrolet G10 Van

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1975 – 1995 Chevrolet G20

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 – 1973 Chevrolet Impala

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 Chevrolet Impala

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1974 Chevrolet Impala

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1975 Chevrolet Impala

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1976 Chevrolet Impala

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1976 – 1977 Chevrolet Impala

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 – 1978 Chevrolet Impala

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1978 – 1979 Chevrolet Impala

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1979 Chevrolet Impala

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 Chevrolet Impala

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1981 Chevrolet Impala

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1981 – 1982 Chevrolet Impala

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 Chevrolet Impala

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1983 Chevrolet Impala

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1984 Chevrolet Impala

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1985 Chevrolet Impala

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1994 Chevrolet Impala

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1994 – 1995 Chevrolet Impala

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1995 – 1996 Chevrolet Impala

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1996 Chevrolet Impala

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1975 Chevrolet K10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1976 Chevrolet K10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 Chevrolet K10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1978 Chevrolet K10
  • 1979 Chevrolet K10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 Chevrolet K10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1980 – 1981 Chevrolet K10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1981 Chevrolet K10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1982 Chevrolet K10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1983 Chevrolet K10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 – 1984 Chevrolet K10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1984 Chevrolet K10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1985 Chevrolet K10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1986 Chevrolet K10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 Chevrolet K10 Pickup

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1972 Chevrolet K10 Pickup

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 Chevrolet K10 Pickup

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1974 Chevrolet K10 Pickup

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 – 1982 Chevrolet K10 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 – 1983 Chevrolet K10 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1983 – 1984 Chevrolet K10 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1984 – 1985 Chevrolet K10 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1985 Chevrolet K10 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1986 Chevrolet K10 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1988 Chevrolet K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1988 – 1989 Chevrolet K1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1989 Chevrolet K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1990 Chevrolet K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1991 Chevrolet K1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1991 – 1992 Chevrolet K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1992 – 1993 Chevrolet K1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1993 – 1994 Chevrolet K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1994 Chevrolet K1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1995 Chevrolet K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1995 – 1996 Chevrolet K1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1996 Chevrolet K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1997 Chevrolet K1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1997 – 1998 Chevrolet K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1998 – 1999 Chevrolet K1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1999 Chevrolet K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1992 Chevrolet K1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1993 Chevrolet K1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1994 Chevrolet K1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1994 – 1995 Chevrolet K1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1995 – 1996 Chevrolet K1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1996 Chevrolet K1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1997 Chevrolet K1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1997 – 1998 Chevrolet K1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1998 Chevrolet K1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1999 Chevrolet K1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 – 1986 Chevrolet K20

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1988 – 1991 Chevrolet K2500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1992 – 1996 Chevrolet K2500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 – 1982 Chevrolet K5 Blazer

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 Chevrolet K5 Blazer

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1983 Chevrolet K5 Blazer

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 – 1984 Chevrolet K5 Blazer

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1984 – 1985 Chevrolet K5 Blazer

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1985 – 1986 Chevrolet K5 Blazer

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1986 Chevrolet K5 Blazer

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1974 – 1983 Chevrolet Malibu

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 Chevrolet Monte Carlo

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1971 – 1972 Chevrolet Monte Carlo

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1972 – 1973 Chevrolet Monte Carlo

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1973 – 1974 Chevrolet Monte Carlo

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1974 – 1975 Chevrolet Monte Carlo

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1975 Chevrolet Monte Carlo

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1976 Chevrolet Monte Carlo

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1976 – 1977 Chevrolet Monte Carlo

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 Chevrolet Monte Carlo

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1970 Chevrolet Nova

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1970 – 1971 Chevrolet Nova

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1971 – 1972 Chevrolet Nova

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1972 – 1973 Chevrolet Nova

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1973 Chevrolet Nova

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1974 Chevrolet Nova

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1975 Chevrolet Nova

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1976 Chevrolet Nova

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1976 – 1977 Chevrolet Nova

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 Chevrolet Nova

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1978 Chevrolet Nova

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1978 – 1979 Chevrolet Nova

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1979 Chevrolet Nova

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 – 1980 Chevrolet P10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1987 Chevrolet R10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1987 Chevrolet R10 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1987 – 1988 Chevrolet R10 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1988 Chevrolet R10 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1989 Chevrolet R1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1989 – 1990 Chevrolet R1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1990 – 1991 Chevrolet R1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1991 Chevrolet R1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1987 – 1988 Chevrolet R20

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1987 – 1988 Chevrolet R20 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1989 Chevrolet R2500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1989 – 1991 Chevrolet R2500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1994 – 1998 Chevrolet S10

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1991 – 1994 Chevrolet S10 Blazer

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1999 Chevrolet Silverado 1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1995 Chevrolet Tahoe

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1996 Chevrolet Tahoe

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1997 Chevrolet Tahoe

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1997 – 1998 Chevrolet Tahoe

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1998 Chevrolet Tahoe

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1999 Chevrolet Tahoe

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1981 – 1984 Chevrolet Terrain

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1987 Chevrolet V10

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1987 Chevrolet V10 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1988 Chevrolet V10 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1989 Chevrolet V1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1990 Chevrolet V1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1990 – 1991 Chevrolet V1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1991 Chevrolet V1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1975 – 1976 GMC C15

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 GMC C15

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1978 GMC C15

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 – 1978 GMC C15 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 – 1974 GMC C15/C1500 Pickup

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1979 GMC C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 GMC C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1981 GMC C1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1981 – 1982 GMC C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 GMC C1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1983 GMC C1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1984 GMC C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1984 – 1985 GMC C1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1985 GMC C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1986 GMC C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1988 GMC C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1989 GMC C1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1989 – 1990 GMC C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1990 – 1991 GMC C1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1991 GMC C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1992 GMC C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1993 GMC C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1994 GMC C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1995 GMC C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1996 GMC C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1997 GMC C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1998 GMC C1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1998 – 1999 GMC C1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1999 GMC C1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1979 – 1982 GMC C1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 GMC C1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1983 GMC C1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 – 1984 GMC C1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1984 GMC C1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1985 GMC C1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1985 – 1986 GMC C1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1986 GMC C1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1992 GMC C1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1992 – 1993 GMC C1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1993 GMC C1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1994 GMC C1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1995 GMC C1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1995 – 1996 GMC C1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1996 GMC C1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1997 GMC C1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1998 GMC C1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1999 GMC C1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 – 1978 GMC C25 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1985 – 1986 GMC C2500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1988 – 1991 GMC C2500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 – 1986 GMC C2500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1992 – 1996 GMC C2500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1978 GMC Caballero

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 GMC Caballero

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1979 – 1980 GMC Caballero

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 – 1981 GMC Caballero

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1981 GMC Caballero

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 GMC Caballero

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1982 – 1983 GMC Caballero

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 – 1984 GMC Caballero

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1984 GMC Caballero

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1985 GMC Caballero

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1985 – 1986 GMC Caballero

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1986 – 1987 GMC Caballero

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1987 GMC Caballero

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1975 – 1976 GMC G15

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 GMC G15

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 – 1978 GMC G15

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1978 GMC G15

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1970 – 1974 GMC G15/G1500 Van

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 GMC G1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 GMC G1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1980 – 1981 GMC G1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1981 GMC G1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1982 GMC G1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1983 GMC G1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 – 1984 GMC G1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1984 – 1985 GMC G1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1985 GMC G1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1986 GMC G1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1987 GMC G1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1988 GMC G1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1989 GMC G1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1990 GMC G1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1990 – 1991 GMC G1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1991 GMC G1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1992 GMC G1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1992 – 1993 GMC G1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1993 – 1994 GMC G1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1994 GMC G1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1995 GMC G1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1975 – 1978 GMC G25

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1970 – 1974 GMC G25/G2500 Van

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 – 1995 GMC G2500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 – 1991 GMC Jimmy

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1995 GMC Jimmy

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1996 GMC Jimmy

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1997 GMC Jimmy

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1998 GMC Jimmy

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1998 – 1999 GMC Jimmy

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1975 – 1978 GMC K15

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 – 1978 GMC K15 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 GMC K15/K1500 Pickup

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1971 – 1972 GMC K15/K1500 Pickup

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1972 GMC K15/K1500 Pickup

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1973 GMC K15/K1500 Pickup

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 – 1974 GMC K15/K1500 Pickup

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1974 GMC K15/K1500 Pickup

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 GMC K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1979 – 1980 GMC K1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 – 1981 GMC K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1981 – 1982 GMC K1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 GMC K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1983 GMC K1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 – 1984 GMC K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1984 – 1985 GMC K1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1985 – 1986 GMC K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1986 GMC K1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1988 GMC K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1989 GMC K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1990 GMC K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1991 GMC K1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1991 – 1992 GMC K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1992 – 1993 GMC K1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1993 GMC K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1994 GMC K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1995 GMC K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1996 GMC K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1997 GMC K1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1997 – 1998 GMC K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1998 – 1999 GMC K1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1999 GMC K1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1979 – 1981 GMC K1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 GMC K1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 GMC K1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1984 GMC K1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1985 GMC K1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1986 GMC K1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1992 GMC K1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1992 – 1993 GMC K1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1993 GMC K1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1994 GMC K1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1994 – 1995 GMC K1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1995 – 1996 GMC K1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1996 GMC K1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1997 GMC K1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1998 GMC K1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1998 – 1999 GMC K1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1999 GMC K1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 – 1978 GMC K25

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 – 1978 GMC K25 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1986 GMC K2500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1988 – 1991 GMC K2500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 – 1986 GMC K2500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1992 – 1996 GMC K2500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 – 1980 GMC P1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1987 GMC R1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1987 GMC R1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1987 – 1988 GMC R1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1988 GMC R1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1989 GMC R1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1990 GMC R1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1991 GMC R1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1987 – 1989 GMC R2500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1989 – 1991 GMC R2500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1996 GMC Savana 1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1997 GMC Savana 1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1997 – 1998 GMC Savana 1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1998 GMC Savana 1500

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1999 GMC Savana 1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1996 GMC Savana 2500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1991 – 1993 GMC Sonoma

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1994 GMC Sonoma

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1994 – 1995 GMC Sonoma

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1995 GMC Sonoma

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1996 GMC Sonoma

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1996 – 1997 GMC Sonoma

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1997 GMC Sonoma

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1998 GMC Sonoma

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1998 – 1999 GMC Sonoma

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1987 GMC V1500

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1987 GMC V1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1988 GMC V1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1988 – 1989 GMC V1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1989 – 1990 GMC V1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1990 – 1991 GMC V1500 Suburban

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1991 GMC V1500 Suburban

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1992 – 1993 GMC Yukon

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1993 – 1994 GMC Yukon

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1994 GMC Yukon

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1995 GMC Yukon

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1995 – 1996 GMC Yukon

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1996 GMC Yukon

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1997 GMC Yukon

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1998 GMC Yukon

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1999 GMC Yukon

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 2000 GMC Yukon

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1996 – 1998 Isuzu Hombre

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 Oldsmobile 442

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1970 Oldsmobile 98

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1971 Oldsmobile 98

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1972 Oldsmobile 98

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1973 Oldsmobile 98

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1974 Oldsmobile 98

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1974 – 1975 Oldsmobile 98

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1975 Oldsmobile 98

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1976 Oldsmobile 98

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1976 – 1977 Oldsmobile 98

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 Oldsmobile 98

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1978 Oldsmobile 98

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1978 – 1979 Oldsmobile 98

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1979 – 1980 Oldsmobile 98

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 – 1981 Oldsmobile 98

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1981 – 1982 Oldsmobile 98

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1982 – 1983 Oldsmobile 98

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1983 – 1984 Oldsmobile 98

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 – 1979 Oldsmobile Custom Cruiser

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 Oldsmobile Custom Cruiser

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1980 – 1981 Oldsmobile Custom Cruiser

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1981 – 1982 Oldsmobile Custom Cruiser

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1982 – 1983 Oldsmobile Custom Cruiser

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 – 1984 Oldsmobile Custom Cruiser

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1984 Oldsmobile Custom Cruiser

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1985 Oldsmobile Custom Cruiser

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1986 Oldsmobile Custom Cruiser

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1986 – 1987 Oldsmobile Custom Cruiser

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1987 Oldsmobile Custom Cruiser

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1988 Oldsmobile Custom Cruiser

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1989 Oldsmobile Custom Cruiser

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1989 – 1992 Oldsmobile Custom Cruiser

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1970 Oldsmobile Cutlass

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 Oldsmobile Cutlass

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1971 – 1972 Oldsmobile Cutlass

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1972 – 1973 Oldsmobile Cutlass

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1973 Oldsmobile Cutlass

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1974 Oldsmobile Cutlass

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1974 – 1975 Oldsmobile Cutlass

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1975 Oldsmobile Cutlass

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1976 Oldsmobile Cutlass

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 Oldsmobile Cutlass

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1978 – 1981 Oldsmobile Cutlass

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1985 – 1987 Oldsmobile Cutlass

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1975 – 1977 Oldsmobile Cutlass Salon

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1985 – 1986 Oldsmobile Cutlass Salon

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1971 Oldsmobile Cutlass Supreme

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1972 Oldsmobile Cutlass Supreme

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1972 – 1973 Oldsmobile Cutlass Supreme

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1973 – 1974 Oldsmobile Cutlass Supreme

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1974 – 1975 Oldsmobile Cutlass Supreme

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1975 Oldsmobile Cutlass Supreme

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1976 Oldsmobile Cutlass Supreme

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 Oldsmobile Cutlass Supreme

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1976 Oldsmobile Cutlass Tiara

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1970 – 1980 Oldsmobile Delta 88

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1981 Oldsmobile Delta 88

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1981 – 1982 Oldsmobile Delta 88

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1982 – 1983 Oldsmobile Delta 88

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 – 1984 Oldsmobile Delta 88

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1984 Oldsmobile Delta 88

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1985 Oldsmobile Delta 88

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1970 Oldsmobile F85

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1971 Oldsmobile F85

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 – 1972 Oldsmobile F85

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1972 Oldsmobile F85

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 Oldsmobile Omega

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1973 – 1974 Oldsmobile Omega

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1974 – 1975 Oldsmobile Omega

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1975 – 1976 Oldsmobile Omega

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1976 – 1977 Oldsmobile Omega

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 Oldsmobile Omega

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1978 Oldsmobile Omega

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1978 – 1979 Oldsmobile Omega

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 Oldsmobile Omega

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1976 Pontiac Astre

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 – 1973 Pontiac Bonneville

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 – 1974 Pontiac Bonneville

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1974 Pontiac Bonneville

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1975 Pontiac Bonneville

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1976 Pontiac Bonneville

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 Pontiac Bonneville

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1978 Pontiac Bonneville

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 Pontiac Bonneville

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1979 – 1980 Pontiac Bonneville

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 – 1981 Pontiac Bonneville

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1981 – 1986 Pontiac Bonneville

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 – 1977 Pontiac Catalina

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 Pontiac Catalina

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1978 Pontiac Catalina

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 Pontiac Catalina

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 Pontiac Catalina

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1981 Pontiac Catalina

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 Pontiac Firebird

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1971 – 1972 Pontiac Firebird

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1972 Pontiac Firebird

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1973 Pontiac Firebird

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 – 1974 Pontiac Firebird

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1974 Pontiac Firebird

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1975 Pontiac Firebird

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1976 Pontiac Firebird

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1976 – 1977 Pontiac Firebird

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 – 1978 Pontiac Firebird

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1978 Pontiac Firebird

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 Pontiac Firebird

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1980 Pontiac Firebird

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1981 Pontiac Firebird

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1970 – 1973 Pontiac GTO

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 Pontiac Grand Am

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1973 – 1974 Pontiac Grand Am

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1974 Pontiac Grand Am

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1975 Pontiac Grand Am

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1978 Pontiac Grand Am

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1978 – 1979 Pontiac Grand Am

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1979 – 1980 Pontiac Grand Am

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1980 Pontiac Grand Am

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1975 – 1977 Pontiac Grand LeMans

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 Pontiac Grand Prix

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 – 1972 Pontiac Grand Prix

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1972 – 1973 Pontiac Grand Prix

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 Pontiac Grand Prix

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1974 Pontiac Grand Prix

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1975 Pontiac Grand Prix

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1976 Pontiac Grand Prix

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1976 – 1977 Pontiac Grand Prix

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1977 Pontiac Grand Prix

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 – 1978 Pontiac Grand Safari

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 – 1975 Pontiac Grandville

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 – 1972 Pontiac Laurentian

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 Pontiac LeMans

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1972 Pontiac LeMans

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 Pontiac LeMans

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1973 – 1974 Pontiac LeMans

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1974 – 1975 Pontiac LeMans

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1975 Pontiac LeMans

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1976 Pontiac LeMans

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1976 – 1977 Pontiac LeMans

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 Pontiac LeMans

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1978 Pontiac LeMans

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1976 – 1983 Pontiac Parisienne

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1983 – 1984 Pontiac Parisienne

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1984 – 1985 Pontiac Parisienne

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1985 – 1986 Pontiac Parisienne

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1986 Pontiac Parisienne

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 – 1979 Pontiac Phoenix

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1987 – 1989 Pontiac Safari

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1971 Pontiac Ventura

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1972 Pontiac Ventura

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1972 – 1973 Pontiac Ventura

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1973 – 1974 Pontiac Ventura

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1974 – 1975 Pontiac Ventura

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1975 – 1976 Pontiac Ventura

    Application notes:

    • 8.5 In. Ring Gear
    • Standard Design
  • 1976 Pontiac Ventura

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
  • 1977 Pontiac Ventura

    Application notes:

    • For GM 8.5" (10 Bolt)
    • Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov