← Back to search

Differential Master Bearing Kit - Koyo

R10CRMK Application Notes

Warranty

1 Year or 50,000 Miles

R10CRMK Specifications

App Model GM 8.2

Differential Case Design Type GM 8.2, GM 8.2

Position Rear

Prop 65 Long Label WARNING: Reproductive Harm - www.p65warnings.ca.gov

Prop 65 Short Label WARNING: Cancer - www.p65warnings.ca.gov

Prop 65 Y N N

Taxonomy A LD Differential, LD Differential, LD Differential, LD Differential

Taxonomy B Differential Rebuild Kits, Differential Rebuild Kits, Differential Rebuild Kits

Taxonomy C Master Bearing Kits, Master Bearing Kits, Master Bearing Kits

Taxonomy D Rear, Rear, Rear

Where to buy

Vehicle Applications

1965 – 1970 Chevrolet Bel Air
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1963 Chevrolet Biscayne
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1965 – 1970 Chevrolet Biscayne
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1969 – 1970 Chevrolet Brookwood
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1967 Chevrolet Camaro
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1968 Chevrolet Camaro
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1968 – 1969 Chevrolet Camaro
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1969 – 1970 Chevrolet Camaro
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1970 Chevrolet Camaro
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1966 Chevrolet Caprice
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1966 – 1967 Chevrolet Caprice
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1967 Chevrolet Caprice
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1968 Chevrolet Caprice
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1968 – 1969 Chevrolet Caprice
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1969 Chevrolet Caprice
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1970 Chevrolet Caprice
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1970 – 1971 Chevrolet Caprice
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1971 – 1972 Chevrolet Caprice
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1964 Chevrolet Chevelle
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1965 Chevrolet Chevelle
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1966 Chevrolet Chevelle
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1967 Chevrolet Chevelle
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1968 Chevrolet Chevelle
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1969 Chevrolet Chevelle
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1969 – 1970 Chevrolet Chevelle
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1970 – 1971 Chevrolet Chevelle
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1971 – 1972 Chevrolet Chevelle
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1972 Chevrolet Chevelle
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1964 Chevrolet Chevy II
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1965 Chevrolet Chevy II
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1966 Chevrolet Chevy II
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1966 – 1967 Chevrolet Chevy II
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1967 Chevrolet Chevy II
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1968 Chevrolet Chevy II
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1964 Chevrolet El Camino
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1965 Chevrolet El Camino
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1966 Chevrolet El Camino
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1967 Chevrolet El Camino
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1967 – 1968 Chevrolet El Camino
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1968 Chevrolet El Camino
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1969 Chevrolet El Camino
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1970 Chevrolet El Camino
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1971 Chevrolet El Camino
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1972 Chevrolet El Camino
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1964 – 1971 Chevrolet G10 Van
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1963 Chevrolet Impala
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1965 Chevrolet Impala
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1965 – 1966 Chevrolet Impala
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1966 – 1967 Chevrolet Impala
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1967 – 1968 Chevrolet Impala
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1968 – 1969 Chevrolet Impala
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1969 – 1970 Chevrolet Impala
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1970 – 1971 Chevrolet Impala
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1971 Chevrolet Impala
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1972 Chevrolet Impala
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1964 – 1967 Chevrolet Malibu
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1970 Chevrolet Monte Carlo
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1970 – 1971 Chevrolet Monte Carlo
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1971 – 1972 Chevrolet Monte Carlo
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1972 Chevrolet Monte Carlo
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1969 Chevrolet Nova
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1969 – 1970 Chevrolet Nova
Application notes:
- 8.2 In. Axle
- Standard Design
1970 – 1971 Chevrolet Nova
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1971 Chevrolet Nova
Application notes:
- 8.2 In. Axle
- Standard Design
1972 Chevrolet Nova
Application notes:
- 8.2 In. Axle
- Standard Design
1970 – 1972 Ford Royal
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1967 – 1974 GMC G15/G1500 Van
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1964 – 1966 GMC G1500
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1979 – 1995 GMC G1500
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1971 – 1972 GMC Sprint
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1965 Pontiac Catalina
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1966 Pontiac Catalina
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1967 Pontiac Catalina
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1968 Pontiac Catalina
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1968 – 1969 Pontiac Catalina
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1969 Pontiac Catalina
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1970 Pontiac Catalina
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1971 Pontiac Catalina
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1971 – 1972 Pontiac Catalina
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1972 Pontiac Catalina
Application notes:
- 1.7812 In. I.D. Differential Bearings
- 8.2 In. Axle
- Standard Design
1970 Pontiac Firebird
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound
1971 Pontiac Ventura
Application notes:
- For GM 8.2" (10 Bolt)
- Fits Aftermarket Ring and Pinion
- OEM Ring and Pinion Applications Require Part# 3106
- Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov