New Products at Motive Gear
Here at Motive Gear, we always strive to expand and improve out product line. Click on any heading below for an expanded list of new products for that section. Check back often since we're always adding on.
Click to Display New Additions
NV149, 246, 261 and 263 Transfer Case Half
Part Number MG260001 will fit four applications: 149,246,261,& 263.
Replaces:
NV30961 -FITS 261,263,149
NV30603 -FITS 246
This case is made of magnesium and has a built-up pump area to reduce the chance of premature wear.
Includes output shaft bearing HK5020NHC
Dana 60 9310 Pro Gears
| D997410 | Dana 60 - 4.10, 9310 Pro Gear |
| D997430 | Dana 60 - 4.30, 9310 Pro Gear |
| D997456 | Dana 60 - 4.56, 9310 Pro Gear |
| D997488 | Dana 60 - 4.88, 9310 Pro Gear |
| D997514 | Dana 60 - 5.14, 9310 Pro Gear |
Ford 8.8" 9310 Pro Gear
| F988390 | Ford 8.8" - 3.90 9310 Pro Gear |
Ford 9" 9310 Pro Gears
| F990350SP | Ford 9" - 3.50, 9310 Pro Gear, 28 Spline Pinion |
| F990370SP | Ford 9" - 3.70, 9310 Pro Gear, 28 Spline Pinion |
| F990370BP | Ford 9" - 3.70, 9310 Pro Gear, 35 Spline Pinion |
| F990389SP | Ford 9" - 3.89, 9310 Pro Gear, 28 Spline Pinion |
| F990389BP | Ford 9" - 3.89, 9310 Pro Gear, 35 Spline Pinion |
| F990411BP | Ford 9" - 4.11, 9310 Pro Gear, 35 Spline Pinion |
| F990429SP | Ford 9" - 4.29, 9310 Pro Gear, 28 Spline Pinion |
| F990457SP | Ford 9" - 4.57, 9310 Pro Gear, 28 Spline Pinion |
| F990457BP | Ford 9" - 4.57, 9310 Pro Gear, 35 Spline Pinion |
| F990486SP | Ford 9" - 4.86, 9310 Pro Gear, 28 Spline Pinion |
| F990486BP | Ford 9" - 4.86, 9310 Pro Gear, 35 Spline Pinion |
| F990514SP | Ford 9" - 5.14, 9310 Pro Gear, 28 Spline Pinion |
| F990529SP | Ford 9" - 5.29, 9310 Pro Gear, 28 Spline Pinion |
| F990543SP | Ford 9" - 5.43, 9310 Pro Gear, 28 Spline Pinion |
| F990567SP | Ford 9" - 5.67, 9310 Pro Gear, 28 Spline Pinion |
| F990583SP | Ford 9" - 5.83, 9310 Pro Gear, 28 Spline Pinion |
| F990600SP | Ford 9" - 6.00, 9310 Pro Gear, 28 Spline Pinion |
| F990620SP | Ford 9" - 6.20, 9310 Pro Gear, 28 Spline Pinion |
| F990650SP | Ford 9" - 6.50, 9310 Pro Gear, 28 Spline Pinion |
GM 7.5" 9310 Pro Gear
| G975390 | GM 7.5" - 3.90, 9310 Pro Gear |
GM 12 Bolt Car 9310 Pro Gears
| G998411 | GM 12 Bolt Car - 4.11, 9310 Pro Gear |
| G998430 | GM 12 Bolt Car - 4.30, 9310 Pro Gear |
| G998456 | GM 12 Bolt Car - 4.56, 9310 Pro Gear |
| G998488 | GM 12 Bolt Car - 4.88, 9310 Pro Gear |
| G998514 | GM 12 Bolt Car - 5.14, 9310 Pro Gear |
Late Model Camaro Gears (Due Q1 2011)
| G886391 | 2009 & Up Camaro, 3.91 Ratio |
| G886410 | 2009 & Up Camaro, 4.10 Ratio |
Late Model Pontiac GTO & G8 Gears
| G80370 | 2004 & Up Pontiac GTO, 3.70 Ratio |
| G80390 | 2004 & Up Pontiac GTO, 3.90 Ratio |
| GZ85390 | 2004 & Up Pontiac G8, 3.90 Ratio |
| GZ85411 | 2004 & Up Pontiac G8, 4.11 Ratio |
New Ratios for Existing GM & Chrysler Applications
| C887355E | Chrysler 8 3/4" 742 Case 3.55 Ratio |
| G875355 | GM 7.5"/7.625", 3.55 Ratio |
| G882308 | GM 8.2" Car ('64-'71) 3.08 Ratio |
| G884308 | GM 8.2" Car ('55-'64) 3.08 Ratio |
| G888373T | GM 8.875" 12 Bolt Car ('64-'72) 3.73 Ratio; Thin Gear Set for 3.90 & Up Carrier |
| G888411X | GM 8.875" 12 Bolt Car ('64-'72) 4.11 Ratio; Thick Gear Set for 3.73 & Down Carrier |
Performance Full Spools
| FS10-28 | Full Spool for GM 10 Bolt 8.5" 28 Spline |
| FS10-30 | Full Spool for GM 10 Bolt 8.5" 30 Spline |
| FS12-30 | Full Spool for GM 12 Bolt 8.875" 30 Spline |
| FS8.75-30 | Full Spool for Chrysler 8.75" 30 Spline |
| FS8.8-31 | Steel Full Spool for Ford 8.8" 31 Spline |
| FS9-28 | Steel Full Spool for Ford 9", 28 Spline |
| FS9-28LW | Light Weight Steel Full Spool for Ford 9", 28 Spline |
| FS9-31 | Steel Full Spool for Ford 9", 31 Spline |
| FS9-31LW | Light Weight Steel Full Spool for Ford 9", 31 Spline |
| FS9-35 | Steel Full Spool for Ford 9", 35 Spline |
| FSD44-30 | Full Spool for Dana 44 30 Spline |
| FSD60-35H | Full Spool for Dana 60 35 Spline 4.10 & Down |
| FSD60-35L | Full Spool for Dana 60 35 Spline 4.56 & Up |
| FSTOY-30 | Full Spool for Toyota 8" 30 Spline |
Performance Mini Spools
| MS10-28 | Mini Spool for GM 10 Bolt 8.5" |
| MS10C-28 | Mini Spool for GM 10 Bolt 8.2" |
| MS12C | Mini Spool for GM 12 Bolt Car |
| MS7.5-26 | Mini Spool for GM 7.5" 26 Spline |
| MS7.5-28 | Mini Spool for GM 7.5" 28 Spline |
| MS88-28 | Mini Spool for Ford 8.8" 28 Spline |
| MS88-31 | Mini Spool for Ford 8.8" 31 Spline |
| MS9-28 | Mini Spool for Ford 9" 28 Spline (Now Lightened!) |
| MS9-31 | Mini Spool for Ford 9" 31 Spline (Now Lightened!) |
NEW Spool Bearing Kits - Featuring TIMKEN Bearings!
| CK88 | Spool Bearing Kit for Ford 8.8" |
| CK9-289 | Spool Bearing Kit for Ford 9" with 2.89 Carrier |
| CK9-306 | Spool Bearing Kit for Ford 9" with 3.06 Carrier |
| CK9-325 | Spool Bearing Kit for Ford 9" with 3.25 Carrier |
| CK10 | Spool Bearing Kit for GM 10 Bolt 8.5" (1970-1998) |
| CK12C | Spool Bearing Kit for GM 12 Bolt Car |
| CK44L | Spool Bearing Kit for Dana 44 (1967 & Up) |
| CK875 | Spool Bearing Kit for Chrysler 8.75" (All) |